Brownells Premium Roll Pin Starter Punches 1/16" Roll Pin Starter Punch USA & Canada







HOME PAGE PRODUCTS





Brownells Premium Roll Pin Starter Punches 1/16

Brownells Premium Roll Pin Starter Punches 1/16" Roll Pin Starter Punch USA & Canada




Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001075-080001075-11370.

Indicative Price: USD 5.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Brownells Gunsmith's Alignment Pins Large Alignment Pin USA & Canada
    Brownells Gunsmith's Alignment Pins Large Alignment Pin USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Made for us exclusively, to our professional specifications, and are forged, taper-ground and polished. Dimensions set to give you size overlap from pin to pin to cover every conceivable situation. Tapers are 2" long on the 4" long pins. Manufacturer: brownells specs: taper as follows: small, from .070" (1.8mm) to .156" (4.0mm). Medium, from .110" (2.8mm) to .187" (4.7mm). Large, from .150" (3.8mm) to .219" (5.6mm). Knurled handle. Steel. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080645015-080645007-11370.
    More....

    Mayhew Steel Single Starting Punches 3/32" Starting Punch USA & Canada
    Mayhew Steel Single Starting Punches 3/32" Starting Punch USA & Canada

    USD 9.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Always use starting punches to break loose stuck or tight pins to protect both the pin punch and the gun. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587465093-587465062-11370.
    More....

    Brownells Magnetic Pin Starters Small Magnetic Pin Starter USA & Canada
    Brownells Magnetic Pin Starters Small Magnetic Pin Starter USA & Canada

    USD 16.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Holds the round-headed gun pins (like those used by s&w) when starting them back into their holes. The best way to prevent reasesmbly scratches. Manufacturer: brownells specs: 3" (7.6mm) long. Hole i.D.: small, .057" (1.4mm). And medium, .070" (1.8mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080242057-080242057-11370.
    More....

    Grace Starter Punches Set 4 Pc USA & Canada
    Grace Starter Punches Set 4 Pc USA & Canada

    USD 21.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Starter punch set includes 4 flathead, tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Manufacturer: grace USA specs: starter punch set - 4 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000006-354000007-11370.
    More....

    Brownells Alignment & Push Punches .092" Diameter Brass USA & Canada
    Brownells Alignment & Push Punches .092" Diameter Brass USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000024-080000029-11370.
    More....

    Brownells Magnetic Pin Starters Medium Magnetic Pin Starter USA & Canada
    Brownells Magnetic Pin Starters Medium Magnetic Pin Starter USA & Canada

    USD 13.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Holds the round-headed gun pins (like those used by s&w) when starting them back into their holes. The best way to prevent reasesmbly scratches. Manufacturer: brownells specs: 3" (7.6mm) long. Hole i.D.: small, .057" (1.4mm). And medium, .070" (1.8mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080242070-080242057-11370.
    More....

    Brownells Starter Punch Set Replaceable Pins (6) 1"x.091" USA & Canada
    Brownells Starter Punch Set Replaceable Pins (6) 1"x.091" USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    We are constantly encouraging you to always use starting punches to break tight pins loose - then use a "drift" or pin-punch to drive the pin the rest of the way out. This saves bending pin punches, but much more importantly, it prevents fine guns from getting pin punch mars should the pin punch bend and slip - or - break, and scratch. To bring you the best possible starter punches, we have had special, short replaceable pins made up to fit our famous gunsmith's replacement punch set handles. Their regular use will definitely improve your production . . . And your professionalism! Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins 1" (2.5cm) long. Set includes 3 punches and three pins. Replacement pin sizes: .039" (.99mm) for 3⁄64" (1.2mm) diameter pins. .060" (1.5mm) for 1⁄16" (1.6mm) diameter pins. .091" (2.3mm) for 3⁄32" (2.4mm) diameter pins. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080513691-080513039-11370.
    More....

    Brownells Nylon/Brass Drift Punch Remington Shotgun Non Marring Nylon Punch USA & Canada
    Brownells Nylon/Brass Drift Punch Remington Shotgun Non Marring Nylon Punch USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001224-080475001-11370.
    More....

    Lyman Gunsmith Punch Set USA & Canada
    Lyman Gunsmith Punch Set USA & Canada

    USD 26.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Quality steel punches with hardened steel punch tips and knurled steel handles. Set includes sizes 1/16, 3/32, 1/8, 5/32, and 3/16 in. Punches. 1/8 in center punch. Brass drift punch. Storage block. Works well in conjunction with the brass tapper above. Manufacturer: lyman. High specification gunsmith punches by Lyman, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 749003522-749003522-11370.
    More....

    Brownells Premium Roll Pin Punches 3/32" Roll Pin Punch USA & Canada
    Brownells Premium Roll Pin Punches 3/32" Roll Pin Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001070-080001083-11370.
    More....

    Brownells Premium Roll Pin Holders 1/8" Diameter Roll Pin Holder USA & Canada
    Brownells Premium Roll Pin Holders 1/8" Diameter Roll Pin Holder USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001136-080001132-11370.
    More....

    Brownells Nylon/Brass Drift Punch 6 Way Nylon/Brass Punch Set USA & Canada
    Brownells Nylon/Brass Drift Punch 6 Way Nylon/Brass Punch Set USA & Canada

    USD 22.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080475106-080475001-11370.
    More....

    Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4" (10.2cm) Long USA & Canada
    Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4" (10.2cm) Long USA & Canada

    USD 12.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    No pin punch can be guaranteed against breakage, all the gunsmith can do is buy the very best available. When used with starting punches (see elsewhere), these will give you excellent service. Points will not bind in even deepest holes. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587475093-587475062-11370.
    More....

    Mayhew Steel Single Center Punches 455 USA & Canada
    Mayhew Steel Single Center Punches 455 USA & Canada

    USD 3.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Made of properly hardened, tempered and ground tool steel to fill the gunsmith's shop requirements. Manufacturer: mayhew steel specs: punch 222 is " (6.3mm) o.D. X 3 " (9.0cm) long. Punch 455 is 5⁄16" (7.9mm) o.D. X 4" (10.2cm) long. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587113455-587111222-11370.
    More....

    Brownells Premium Roll Pin Holders 5/64" Diameter Roll Pin Holder USA & Canada
    Brownells Premium Roll Pin Holders 5/64" Diameter Roll Pin Holder USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001134-080001132-11370.
    More....





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Brownells Premium Roll Pin Starter Punches 1/16" Roll Pin Starter Punch USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT