Brownells Premium Roll Pin Starter Punches 1/8" Roll Pin Starter Punch USA & Canada







HOME PAGE PRODUCTS





Brownells Premium Roll Pin Starter Punches 1/8

Brownells Premium Roll Pin Starter Punches 1/8" Roll Pin Starter Punch USA & Canada




Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001078-080001075-11370.

Indicative Price: USD 6.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Geissele Automatics Trigger Fitting Pin USA & Canada
    Geissele Automatics Trigger Fitting Pin USA & Canada

    USD 14.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    The geissele trigger fitting pin is correctly sized to help with all small pin ar-15/ar-308 hammer and trigger installations. Manufacturer: geissele automatics llc specs: pin o.D. 0.154". High specification gunsmith punches by Geissele, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 100015134-100015134-11370.
    More....

    Brownells Premium Roll Pin Holders 1/16" Diameter Roll Pin Holder USA & Canada
    Brownells Premium Roll Pin Holders 1/16" Diameter Roll Pin Holder USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001133-080001132-11370.
    More....

    Brownells Alignment & Push Punches .120" Diameter Steel USA & Canada
    Brownells Alignment & Push Punches .120" Diameter Steel USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000030-080000029-11370.
    More....

    Brownells Roll Pin Starter Punches #1 Punch USA & Canada
    Brownells Roll Pin Starter Punches #1 Punch USA & Canada

    USD 5.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Manufacturer: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2mm). #3, 3/32" (2.4mm), #4, 1/8" (3.2mm). #5, 5/32" (4mm). #6, 3/16" (4.8mm). 7/32" (5.5mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000242-080000241-11370.
    More....

    Brownells Hole Center Punches #8 Hole Center Punch USA & Canada
    Brownells Hole Center Punches #8 Hole Center Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base. Drill and tap first hole. Re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Manufacturer: brownells specs: 2- " (7.0cm) long. " (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080732008-080732006-11370.
    More....

    Brownells Nylon/Brass Drift Punch 1/4" Brass Punch Tip USA & Canada
    Brownells Nylon/Brass Drift Punch 1/4" Brass Punch Tip USA & Canada

    USD 5.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080475003-080475001-11370.
    More....

    Brownells Premium Roll Pin Punches 1/8" Roll Pin Punch USA & Canada
    Brownells Premium Roll Pin Punches 1/8" Roll Pin Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001071-080001083-11370.
    More....

    Brownells Roll Pin Holders #4 1/8"(3.2mm) Dia 5"(12.7cm) O/A Length USA & Canada
    Brownells Roll Pin Holders #4 1/8"(3.2mm) Dia 5"(12.7cm) O/A Length USA & Canada

    USD 15.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Holds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear m16/ar-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on sig handguns. Finish driving with roll pin punch. O/a in chart means "overall". Available individually or as a set of 5. Manufacturer: brownells specs: steel, knurled handle. Set of 5. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080685125-080685125-11370.
    More....

    Brownells Roll Pin Punches #7 Roll Pin Punch USA & Canada
    Brownells Roll Pin Punches #7 Roll Pin Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100007-230100000-11370.
    More....

    Brownells Alignment & Push Punches Set Of Four Steel Punches USA & Canada
    Brownells Alignment & Push Punches Set Of Four Steel Punches USA & Canada

    USD 35.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000034-080000029-11370.
    More....

    Starrett #565 Pin Punch Set Starrett Pin Punch 1/8" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 1/8" USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525800-827525780-11370.
    More....

    Mayhew Steel Mini Punches Set Of 3 USA & Canada
    Mayhew Steel Mini Punches Set Of 3 USA & Canada

    USD 17.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    These three small diameter punches give excellent control because of their short length. Ideal when doing small, precision work or in tight spots where a full length punch just won't fit. Forged, one-piece construction with knurled handle. Manufacturer: mayhew steel specs: 2 " (7cm) overall. " (19mm) punch section. Steel. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587474000-587474062-11370.
    More....

    Brownells Small Dovetail Sight Punch USA & Canada
    Brownells Small Dovetail Sight Punch USA & Canada

    USD 9.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    The brownells small dovetail sight punch is designed to help with the installation, removal, and adjustment of front and rear small handgun sights. Unique triangular punch faces and heavy duty bodies create a great working tool for gunsmiths. The small dovetail sight punch has a base width of approximately 0.230". Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001230-080001230-11370.
    More....

    Brownells Gunsmith Master Punch Set USA & Canada
    Brownells Gunsmith Master Punch Set USA & Canada

    USD 109.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    The punches in this master set were specifically chosen for the professional gunsmith. We handpicked high quality punches and added a nylon bench block, nylon/brass hammer, and neoprene gun mat, then packed them in a durable polyethylene case for easy access and storage in the shop. Features (4) premium quality starter punches to break loose stuck or tight pins, (4) pin punches with hardened points that won't bend, (1) prick punch for marking spots before center punching, and (1) center punch for starting holes before drilling. Also includes (4) premium brass punches for drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference betwee Manufacturer: brownells specs: polyethylene case - 14" (35.6cm) long, 9" (23cm) wide, 1-7⁄8" (4.7cm) high. Pin/starter punches - tool steel, knurled body. 4" (10.2cm) long x 1⁄16" (1.6mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), 5⁄32" (4mm) dia. Center punch - t. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000569-080000569-11370.
    More....

    Brownells Starter Punch Set Replaceable Pins (6) 1"x.091" USA & Canada
    Brownells Starter Punch Set Replaceable Pins (6) 1"x.091" USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    We are constantly encouraging you to always use starting punches to break tight pins loose - then use a "drift" or pin-punch to drive the pin the rest of the way out. This saves bending pin punches, but much more importantly, it prevents fine guns from getting pin punch mars should the pin punch bend and slip - or - break, and scratch. To bring you the best possible starter punches, we have had special, short replaceable pins made up to fit our famous gunsmith's replacement punch set handles. Their regular use will definitely improve your production . . . And your professionalism! Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins 1" (2.5cm) long. Set includes 3 punches and three pins. Replacement pin sizes: .039" (.99mm) for 3⁄64" (1.2mm) diameter pins. .060" (1.5mm) for 1⁄16" (1.6mm) diameter pins. .091" (2.3mm) for 3⁄32" (2.4mm) diameter pins. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080513691-080513039-11370.
    More....





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Brownells Premium Roll Pin Starter Punches 1/8" Roll Pin Starter Punch USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2022 : All rights reserved. 140-FT