Brownells Roll Pin Holders Set USA & Canada







HOME PAGE PRODUCTS





Brownells Roll Pin Holders Set USA & Canada

Brownells Roll Pin Holders Set USA & Canada




Holds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear m16/ar-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on sig handguns. Finish driving with roll pin punch. O/a in chart means "overall". Available individually or as a set of 5. Manufacturer: brownells specs: steel, knurled handle. Set of 5. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080685000-080685125-11370.

Indicative Price: USD 39.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Grace Short Pin Punch Set Grace Short Pin Punch Kit USA & Canada
    Grace Short Pin Punch Set Grace Short Pin Punch Kit USA & Canada

    USD 27.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    The grace USA 5 piece short pin punch set is made with the utmost precision. Designed for meticulous work on detailed projects where a short pin punch is needed for accuracy and strength. Sizes 1/16", 5/64", 3/32", 1/8", and 5/32". These punches are made in the USA from high carbon molybendenum tool steel and properly heat treated and hardened the entire length with tempered striking end. They are also centerless ground for complete accuracy. The punches are manufactured from hex stock vs. Round which helps stabilize the punch from rolling away from the user. Packed in a vinyl pouch and 100% made in the USA. Manufacturer: grace USA. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 100025421-100025421-11370.
    More....

    Mayhew Steel Single Starting Punches 3/32" Starting Punch USA & Canada
    Mayhew Steel Single Starting Punches 3/32" Starting Punch USA & Canada

    USD 9.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Always use starting punches to break loose stuck or tight pins to protect both the pin punch and the gun. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587465093-587465062-11370.
    More....

    Starrett 5/32" Center Punch Starrett 5/32" C Punch USA & Canada
    Starrett 5/32" Center Punch Starrett 5/32" C Punch USA & Canada

    USD 17.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Stakes socket-head cap screws securing the bolt carrier key to the bolt carrier. Manufacturer: starrett specs: 4" (10.2cm) long. 5/32" (4mm) punch, 3⁄8" diameter body. High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827512820-827512820-11370.
    More....

    Starrett #565 Pin Punch Set Starrett Pin Punch 1/8" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 1/8" USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525800-827525780-11370.
    More....

    Brownells Nylon/Brass Drift Punch Nylon Punch USA & Canada
    Brownells Nylon/Brass Drift Punch Nylon Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001223-080475001-11370.
    More....

    Brownells Roll Pin Starter Punches #5 Punch USA & Canada
    Brownells Roll Pin Starter Punches #5 Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Manufacturer: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2mm). #3, 3/32" (2.4mm), #4, 1/8" (3.2mm). #5, 5/32" (4mm). #6, 3/16" (4.8mm). 7/32" (5.5mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000246-080000241-11370.
    More....

    Brownells Premium Roll Pin Holders 5/64" Diameter Roll Pin Holder USA & Canada
    Brownells Premium Roll Pin Holders 5/64" Diameter Roll Pin Holder USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001134-080001132-11370.
    More....

    Brownells Hole Center Punches #6 Hole Center Punch USA & Canada
    Brownells Hole Center Punches #6 Hole Center Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base. Drill and tap first hole. Re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Manufacturer: brownells specs: 2- " (7.0cm) long. " (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080732006-080732006-11370.
    More....

    Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada
    Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada

    USD 33.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Punches are machined from solid brass hex stock with a flat head and extra-long shaft to drive pins completely out. Brass is softer than steel, so it won't gouge the gun if you slip. Available as roll pin punches that have a dimple on the working end to keep the punch centered on the pin during use. Contains the following 8 sizes: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. All punches are 3 " long. Manufacturer: grace USA. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 749012802-749012802-11370.
    More....

    Brownells Cup Tip Punches Model 5 .050" (1.3mm) Diameter/Short Length USA & Canada
    Brownells Cup Tip Punches Model 5 .050" (1.3mm) Diameter/Short Length USA & Canada

    USD 17.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Manufacturer: brownells specs: punches - steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long. .066" (1.7mm)/long. .072" (1.8mm/long. .040" (1mm)/short. .050" (1.3mm)/short. .050" (1.3mm)/long. 3mm (.118")/long. 3mm (.118")/short. Bench bl. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080620005-080620001-11370.
    More....

    Grace Roll Pin Punches 3/32" Punch USA & Canada
    Grace Roll Pin Punches 3/32" Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: grace USA specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000028-354000025-11370.
    More....

    Geissele Automatics Roll Pin Tool For Gas Block USA & Canada
    Geissele Automatics Roll Pin Tool For Gas Block USA & Canada

    USD 12.5 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Ingenious tool holds the tiny gas tube roll pin securely to make installation easy and fast. No more fumbling with needle nose pliers or tweezers, only to have the pin fly fly off and get lost! pin is pressed into the tool for a rock-solid hold while the tapered tip enables precise control and correct placement. Safely gets the pin partially in, so the job can be finished with a normal roll pin punch. All-steel construction, matte black oxide finish. Manufacturer: geissele automatics llc. High specification gunsmith punches by Geissele, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 100011667-100011667-11370.
    More....

    Grace Starter Punches 1/16" (1.6mm) Starter Brass Punch USA & Canada
    Grace Starter Punches 1/16" (1.6mm) Starter Brass Punch USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Starter punch set includes 4 flathead, tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Manufacturer: grace USA specs: starter punch set - 4 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000007-354000007-11370.
    More....

    Brownells Premium Roll Pin Punches 7/32" Roll Pin Punch USA & Canada
    Brownells Premium Roll Pin Punches 7/32" Roll Pin Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001074-080001083-11370.
    More....

    Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525840-827525780-11370.
    More....





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Brownells Roll Pin Holders Set USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT