Brownells Roll Pin Starter Punches #3 Punch USA & Canada







HOME PAGE PRODUCTS





Brownells Roll Pin Starter Punches #3 Punch USA & Canada

Brownells Roll Pin Starter Punches #3 Punch USA & Canada




Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Manufacturer: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2mm). #3, 3/32" (2.4mm), #4, 1/8" (3.2mm). #5, 5/32" (4mm). #6, 3/16" (4.8mm). 7/32" (5.5mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000244-080000241-11370.

Indicative Price: USD 7.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Brownells Cup Tip Punches Model 8 3mm (.118") Diameter/Short Length USA & Canada
    Brownells Cup Tip Punches Model 8 3mm (.118") Diameter/Short Length USA & Canada

    USD 12.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Manufacturer: brownells specs: punches - steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long. .066" (1.7mm)/long. .072" (1.8mm/long. .040" (1mm)/short. .050" (1.3mm)/short. .050" (1.3mm)/long. 3mm (.118")/long. 3mm (.118")/short. Bench bl. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080620301-080620001-11370.
    More....

    Mayhew Steel Single Starting Punches 5/32" Starting Punch USA & Canada
    Mayhew Steel Single Starting Punches 5/32" Starting Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Always use starting punches to break loose stuck or tight pins to protect both the pin punch and the gun. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587465156-587465062-11370.
    More....

    Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525840-827525780-11370.
    More....

    Brownells Nylon/Brass Drift Punch Nylon Punch Tip USA & Canada
    Brownells Nylon/Brass Drift Punch Nylon Punch Tip USA & Canada

    USD 4.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080475001-080475001-11370.
    More....

    Grace Brass Punch Set 3/32" (2.4mm) Brass Pin Punch USA & Canada
    Grace Brass Punch Set 3/32" (2.4mm) Brass Pin Punch USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Manufacturer: grace USA specs: brass, 5⁄16" (7.9mm) hex stock. Punch set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354100093-354100062-11370.
    More....

    Brownells Gunsmith Professional Punch Set Pro Punch Set USA & Canada
    Brownells Gunsmith Professional Punch Set Pro Punch Set USA & Canada

    USD 49.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For bench use or service kit. Contains 10 punches, one each of the four super quality starter and pin punches shown above, plus center punch and a special prick punch for staking sights, pins and the like. Attractively packaged in durable, pocketed, roll kit for positive, no-loss storage within the shop and easy carrying when on the go. Manufacturer: brownells specs: 4" (10.2cm) long. " (6.3mm) or 5/16" (8mm) dia. Handles. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080553000-080553000-11370.
    More....

    Brownells Alignment & Push Punches .120" Brass Alignment & Push Punch USA & Canada
    Brownells Alignment & Push Punches .120" Brass Alignment & Push Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000025-080000029-11370.
    More....

    Mayhew Steel Single Prick Punches 440 Prick Punch USA & Canada
    Mayhew Steel Single Prick Punches 440 Prick Punch USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Fine, sharp point for marking spots before center punching. Gives better visibility, more precision to your marking. Tap lightly as a mark only. Use center punch to deepen for drilling. Manufacturer: mayhew steel specs: 5⁄16" (7.9mm) o.D., 4" (10.2cm) long. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587110440-587110440-11370.
    More....

    Starrett #565 Pin Punch Set Starrett Pin Punch 5/16" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 5/16" USA & Canada

    USD 13.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525850-827525780-11370.
    More....

    Brownells Gunsmith's Alignment Pins Medium Alignment Pin USA & Canada
    Brownells Gunsmith's Alignment Pins Medium Alignment Pin USA & Canada

    USD 9.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Made for us exclusively, to our professional specifications, and are forged, taper-ground and polished. Dimensions set to give you size overlap from pin to pin to cover every conceivable situation. Tapers are 2" long on the 4" long pins. Manufacturer: brownells specs: taper as follows: small, from .070" (1.8mm) to .156" (4.0mm). Medium, from .110" (2.8mm) to .187" (4.7mm). Large, from .150" (3.8mm) to .219" (5.6mm). Knurled handle. Steel. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080645011-080645007-11370.
    More....

    Brownells Dovetail Sight Punch Dovetail Punch Kit USA & Canada
    Brownells Dovetail Sight Punch Dovetail Punch Kit USA & Canada

    USD 21.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    These punches are specifically designed for the installation, removal, and adjustment of front and rear handgun sights. Made of brass so they will not mar the sight or the gun if you slip. Unique triangular punch faces and heavy-duty bodies make them indispensable working tools for the gunsmith. Can be re-ground to square up the flat after multiple uses. Front sight punch has a base width of approximately .280". Rear sight punch has a base width of approximately 0.480". They are sold separately or can be purchased together in a handy kit. The small dovetail sight punch (sold separately) has a .230" base width, making it ideal for front and rear sights on compact handguns. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001164-080001138-11370.
    More....

    Grace Brass Punch Set 1/4" (6.4mm) Brass Pin Punch USA & Canada
    Grace Brass Punch Set 1/4" (6.4mm) Brass Pin Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Manufacturer: grace USA specs: brass, 5⁄16" (7.9mm) hex stock. Punch set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354100250-354100062-11370.
    More....

    Brownells Magnetic Pin Starters Medium Magnetic Pin Starter USA & Canada
    Brownells Magnetic Pin Starters Medium Magnetic Pin Starter USA & Canada

    USD 13.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Holds the round-headed gun pins (like those used by s&w) when starting them back into their holes. The best way to prevent reasesmbly scratches. Manufacturer: brownells specs: 3" (7.6mm) long. Hole i.D.: small, .057" (1.4mm). And medium, .070" (1.8mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080242070-080242057-11370.
    More....

    Brownells Dovetail Sight Punch Dovetail Rear Sight Punch USA & Canada
    Brownells Dovetail Sight Punch Dovetail Rear Sight Punch USA & Canada

    USD 11.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    These punches are specifically designed for the installation, removal, and adjustment of front and rear handgun sights. Made of brass so they will not mar the sight or the gun if you slip. Unique triangular punch faces and heavy-duty bodies make them indispensable working tools for the gunsmith. Can be re-ground to square up the flat after multiple uses. Front sight punch has a base width of approximately .280". Rear sight punch has a base width of approximately 0.480". They are sold separately or can be purchased together in a handy kit. The small dovetail sight punch (sold separately) has a .230" base width, making it ideal for front and rear sights on compact handguns. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001139-080001138-11370.
    More....

    Mayhew Steel Single Pin Punches 1/16" (1.6mm) 4" (10.2cm) Long USA & Canada
    Mayhew Steel Single Pin Punches 1/16" (1.6mm) 4" (10.2cm) Long USA & Canada

    USD 12.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    No pin punch can be guaranteed against breakage, all the gunsmith can do is buy the very best available. When used with starting punches (see elsewhere), these will give you excellent service. Points will not bind in even deepest holes. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587475062-587475062-11370.
    More....





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Brownells Roll Pin Starter Punches #3 Punch USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT