Brownells Starter Punch Set Replaceable Pins (6) 1"x.039" USA & Canada







HOME PAGE PRODUCTS





Brownells Starter Punch Set Replaceable Pins (6) 1

Brownells Starter Punch Set Replaceable Pins (6) 1"x.039" USA & Canada




We are constantly encouraging you to always use starting punches to break tight pins loose - then use a "drift" or pin-punch to drive the pin the rest of the way out. This saves bending pin punches, but much more importantly, it prevents fine guns from getting pin punch mars should the pin punch bend and slip - or - break, and scratch. To bring you the best possible starter punches, we have had special, short replaceable pins made up to fit our famous gunsmith's replacement punch set handles. Their regular use will definitely improve your production . . . And your professionalism! Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins 1" (2.5cm) long. Set includes 3 punches and three pins. Replacement pin sizes: .039" (.99mm) for 3⁄64" (1.2mm) diameter pins. .060" (1.5mm) for 1⁄16" (1.6mm) diameter pins. .091" (2.3mm) for 3⁄32" (2.4mm) diameter pins. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080513639-080513039-11370.

Indicative Price: USD 9.99
(for Actual Current Price, possibly lower,
please click below)

Availability: In stock while stock lasts.
Condition: BRAND NEW


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Brownells Hole Center Punches Set USA & Canada
    Brownells Hole Center Punches Set USA & Canada




    Gunsmith Punches USA & Canada
    3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base. Drill and tap first hole. Re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Manufacturer: brownells specs: 2- " (7.0cm) long. " (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080732000-080732006-11370.

    More Info & Supplier : click here

    Brownells Premium Roll Pin Holders 5/64" Diameter Roll Pin Holder USA & Canada
    Brownells Premium Roll Pin Holders 5/64" Diameter Roll Pin Holder USA & Canada




    Gunsmith Punches USA & Canada
    Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001134-080001132-11370.

    More Info & Supplier : click here

    Brownells Roll Pin Holders #2 5/64"(2.0mm) Dia 4 1/2"(11.4cm) O/A Length USA & Canada
    Brownells Roll Pin Holders #2 5/64"(2.0mm) Dia 4 1/2"(11.4cm) O/A Length USA & Canada




    Gunsmith Punches USA & Canada
    Holds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear m16/ar-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on sig handguns. Finish driving with roll pin punch. O/a in chart means "overall". Available individually or as a set of 5. Manufacturer: brownells specs: steel, knurled handle. Set of 5. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080685078-080685125-11370.

    More Info & Supplier : click here

    Brownells Nylon/Brass Drift Punch 1/4" Brass Punch Tip USA & Canada
    Brownells Nylon/Brass Drift Punch 1/4" Brass Punch Tip USA & Canada




    Gunsmith Punches USA & Canada
    Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080475003-080475001-11370.

    More Info & Supplier : click here

    Starrett #565 Pin Punch Set Starrett Pin Punch 1/16" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 1/16" USA & Canada




    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525780-827525780-11370.

    More Info & Supplier : click here

    Precision Reflex Gas Block Assembly Fixture W/ Roll Pin Starter USA & Canada
    Precision Reflex Gas Block Assembly Fixture W/ Roll Pin Starter USA & Canada




    Gunsmith Punches USA & Canada
    Gas block fixture w/roll pin starter is designed for installing the gas tube and inserting the roll pin into the gas block. The block holds the gas block to allow the roll pin starter punch to start the roll pin. Manufacturer: precision reflex, inc. High specification gunsmith punches by Precision, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 714000028-714000028-11370.

    More Info & Supplier : click here

    Starrett #565 Pin Punch Set Starrett Pin Punch 1/8" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 1/8" USA & Canada




    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525800-827525780-11370.

    More Info & Supplier : click here

    Lyman Deluxe Punch Set Roll Pin Punch Set USA & Canada
    Lyman Deluxe Punch Set Roll Pin Punch Set USA & Canada




    Gunsmith Punches USA & Canada
    Remove and replace hollow split roll pins easily and safely using these special-built round-nose punches. The round tip locks into the pin to keep the punch from slipping and damaging receivers, trigger assemblies, and other fragile mechanisms. Machined knurling also helps you maintain a secure grip and retain control of the punch. Made of through-hardened 4140 steel for maximum strength and years of dependable service. Manufacturer: lyman specs: 4140 chrome-moly steel. Set of 4 punches, approximately 4" (10.2cm) long, in 1⁄16" (1.6mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), and 5⁄32" (4mm) diameters. High specification gunsmith punches by Lyman, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 539000018-539000018-11370.

    More Info & Supplier : click here

    Brownells Alignment & Push Punches Alignment/Push Punch Set USA & Canada
    Brownells Alignment & Push Punches Alignment/Push Punch Set USA & Canada




    Gunsmith Punches USA & Canada
    For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000647-080000029-11370.

    More Info & Supplier : click here

    Brownells Cup Tip Punches Model 8 3mm (.118") Diameter/Short Length USA & Canada
    Brownells Cup Tip Punches Model 8 3mm (.118") Diameter/Short Length USA & Canada




    Gunsmith Punches USA & Canada
    Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Manufacturer: brownells specs: punches - steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long. .066" (1.7mm)/long. .072" (1.8mm/long. .040" (1mm)/short. .050" (1.3mm)/short. .050" (1.3mm)/long. 3mm (.118")/long. 3mm (.118")/short. Bench bl. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080620301-080620001-11370.

    More Info & Supplier : click here

    Brownells Premium Roll Pin Starter Punches 3/16" Roll Pin Starter Punch USA & Canada
    Brownells Premium Roll Pin Starter Punches 3/16" Roll Pin Starter Punch USA & Canada




    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001080-080001075-11370.

    More Info & Supplier : click here

    Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada
    Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada




    Gunsmith Punches USA & Canada
    Punches are machined from solid brass hex stock with a flat head and extra-long shaft to drive pins completely out. Brass is softer than steel, so it won't gouge the gun if you slip. Available as roll pin punches that have a dimple on the working end to keep the punch centered on the pin during use. Contains the following 8 sizes: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. All punches are 3 " long. Manufacturer: grace USA. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 749012802-749012802-11370.

    More Info & Supplier : click here

    Brownells Roll Pin Punches #5 Roll Pin Punch USA & Canada
    Brownells Roll Pin Punches #5 Roll Pin Punch USA & Canada




    Gunsmith Punches USA & Canada
    With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100005-230100000-11370.

    More Info & Supplier : click here

    Brownells Premium Roll Pin Punches 5/64" Roll Pin Punch USA & Canada
    Brownells Premium Roll Pin Punches 5/64" Roll Pin Punch USA & Canada




    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001069-080001083-11370.

    More Info & Supplier : click here

    Grace Roll Pin Punches 5/64" Punch USA & Canada
    Grace Roll Pin Punches 5/64" Punch USA & Canada




    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: grace USA specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000027-354000025-11370.

    More Info & Supplier : click here





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Brownells Starter Punch Set Replaceable Pins (6) 1"x.039" USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT