Brownells Starter Punch Set Replaceable Starter Punch .060 Dia. USA & Canada







HOME PAGE PRODUCTS





Brownells Starter Punch Set Replaceable Starter Punch .060 Dia. USA & Canada

Brownells Starter Punch Set Replaceable Starter Punch .060 Dia. USA & Canada




We are constantly encouraging you to always use starting punches to break tight pins loose - then use a "drift" or pin-punch to drive the pin the rest of the way out. This saves bending pin punches, but much more importantly, it prevents fine guns from getting pin punch mars should the pin punch bend and slip - or - break, and scratch. To bring you the best possible starter punches, we have had special, short replaceable pins made up to fit our famous gunsmith's replacement punch set handles. Their regular use will definitely improve your production . . . And your professionalism! Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins 1" (2.5cm) long. Set includes 3 punches and three pins. Replacement pin sizes: .039" (.99mm) for 3⁄64" (1.2mm) diameter pins. .060" (1.5mm) for 1⁄16" (1.6mm) diameter pins. .091" (2.3mm) for 3⁄32" (2.4mm) diameter pins. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080513060-080513039-11370.

Indicative Price: USD 11.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Brownells Premium Roll Pin Holders Set USA & Canada
    Brownells Premium Roll Pin Holders Set USA & Canada

    USD 31.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001132-080001132-11370.
    More....

    Brownells Roll Pin Punches #5 Roll Pin Punch USA & Canada
    Brownells Roll Pin Punches #5 Roll Pin Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100005-230100000-11370.
    More....

    Brownells Premium Roll Pin Starter Punches 3/16" Roll Pin Starter Punch USA & Canada
    Brownells Premium Roll Pin Starter Punches 3/16" Roll Pin Starter Punch USA & Canada

    USD 5.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001080-080001075-11370.
    More....

    Brownells Apex S&W M&P Heavy Duty Pin Punch Apex Tactical S&W M&P Heavy Duty Pin Punch USA & Canada
    Brownells Apex S&W M&P Heavy Duty Pin Punch Apex Tactical S&W M&P Heavy Duty Pin Punch USA & Canada

    USD 9.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    The brownells-apex tactical heavy duty pin punch is the perfect tool for removing the roll pins on the s&w m&p. The handles have a knurled chuck to hold the punch, and additional non-slip knurling on the body. Replaceable punch-the secret of the tool. These tool steel, roll pin punch tips are hardened to rc 54-58, and the perfect length to remove the roll pins on a smith & wesson m&p. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001103-080001103-11370.
    More....

    Brownells Dovetail Sight Punch Dovetail Front Sight Punch USA & Canada
    Brownells Dovetail Sight Punch Dovetail Front Sight Punch USA & Canada

    USD 9.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    These punches are specifically designed for the installation, removal, and adjustment of front and rear handgun sights. Made of brass so they will not mar the sight or the gun if you slip. Unique triangular punch faces and heavy-duty bodies make them indispensable working tools for the gunsmith. Can be re-ground to square up the flat after multiple uses. Front sight punch has a base width of approximately .280". Rear sight punch has a base width of approximately 0.480". They are sold separately or can be purchased together in a handy kit. The small dovetail sight punch (sold separately) has a .230" base width, making it ideal for front and rear sights on compact handguns. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001138-080001138-11370.
    More....

    Brownells Nylon/Brass Drift Punch 1/4" Brass Punch Tip USA & Canada
    Brownells Nylon/Brass Drift Punch 1/4" Brass Punch Tip USA & Canada

    USD 5.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080475003-080475001-11370.
    More....

    Brownells Cup Tip Punches Model 6 .050" (1.3mm) Diameter/Long Length USA & Canada
    Brownells Cup Tip Punches Model 6 .050" (1.3mm) Diameter/Long Length USA & Canada

    USD 17.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Manufacturer: brownells specs: punches - steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long. .066" (1.7mm)/long. .072" (1.8mm/long. .040" (1mm)/short. .050" (1.3mm)/short. .050" (1.3mm)/long. 3mm (.118")/long. 3mm (.118")/short. Bench bl. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080620006-080620001-11370.
    More....

    Brownells Hole Center Punches #10 Hole Center Punch USA & Canada
    Brownells Hole Center Punches #10 Hole Center Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base. Drill and tap first hole. Re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Manufacturer: brownells specs: 2- " (7.0cm) long. " (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080732010-080732006-11370.
    More....

    Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4 1/2" (11.4cm) Long USA & Canada
    Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4 1/2" (11.4cm) Long USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    No pin punch can be guaranteed against breakage, all the gunsmith can do is buy the very best available. When used with starting punches (see elsewhere), these will give you excellent service. Points will not bind in even deepest holes. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587493093-587475062-11370.
    More....

    Starrett Automatic Center Punch Starrett Auto Punch USA & Canada
    Starrett Automatic Center Punch Starrett Auto Punch USA & Canada

    USD 38.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Automatic, one hand operation leaves the other hand free to steady the work. Fully adjustable for strength of impact. All working parts are hardened. Manufacturer: starrett specs: steel. 3-53/64" (9.7cm) long. .405" (10.3mm) diameter. 1 " oz. (42.5g). Knurled body and adjusting cap. Starrett #18aa. High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827501190-827501190-11370.
    More....

    Starrett #565 Pin Punch Set Starrett Pin Punch 1/8" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 1/8" USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525800-827525780-11370.
    More....

    Brownells Cup Tip Punches Model 7 3mm (.118") Diameter/Long Length USA & Canada
    Brownells Cup Tip Punches Model 7 3mm (.118") Diameter/Long Length USA & Canada

    USD 12.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Manufacturer: brownells specs: punches - steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long. .066" (1.7mm)/long. .072" (1.8mm/long. .040" (1mm)/short. .050" (1.3mm)/short. .050" (1.3mm)/long. 3mm (.118")/long. 3mm (.118")/short. Bench bl. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080620300-080620001-11370.
    More....

    Brownells Alignment & Push Punches .246" Diameter Brass USA & Canada
    Brownells Alignment & Push Punches .246" Diameter Brass USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000027-080000029-11370.
    More....

    Brownells Premium Roll Pin Punches 1/8" Roll Pin Punch USA & Canada
    Brownells Premium Roll Pin Punches 1/8" Roll Pin Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001071-080001083-11370.
    More....

    Mayhew Steel Single Pin Punches 1/8" (3.2mm) 4" (10.2cm) Long USA & Canada
    Mayhew Steel Single Pin Punches 1/8" (3.2mm) 4" (10.2cm) Long USA & Canada

    USD 12.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    No pin punch can be guaranteed against breakage, all the gunsmith can do is buy the very best available. When used with starting punches (see elsewhere), these will give you excellent service. Points will not bind in even deepest holes. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587475125-587475062-11370.
    More....





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Brownells Starter Punch Set Replaceable Starter Punch .060 Dia. USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT