Grace Brass Punch Set Brass Pin Punch Set 8 Pc USA & Canada







HOME PAGE PRODUCTS





Grace Brass Punch Set Brass Pin Punch Set 8 Pc USA & Canada

Grace Brass Punch Set Brass Pin Punch Set 8 Pc USA & Canada




For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Manufacturer: grace USA specs: brass, 5⁄16" (7.9mm) hex stock. Punch set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354100000-354100062-11370.

Indicative Price: USD 33.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4 1/2" (11.4cm) Long USA & Canada
    Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4 1/2" (11.4cm) Long USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    No pin punch can be guaranteed against breakage, all the gunsmith can do is buy the very best available. When used with starting punches (see elsewhere), these will give you excellent service. Points will not bind in even deepest holes. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587493093-587475062-11370.
    More....

    Brownells Premium Roll Pin Holders 3/32" Diameter Roll Pin Holder USA & Canada
    Brownells Premium Roll Pin Holders 3/32" Diameter Roll Pin Holder USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001135-080001132-11370.
    More....

    Brownells Premium Roll Pin Starter Punches 1/16" Roll Pin Starter Punch USA & Canada
    Brownells Premium Roll Pin Starter Punches 1/16" Roll Pin Starter Punch USA & Canada

    USD 5.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001075-080001075-11370.
    More....

    Brownells Alignment & Push Punches .120" Brass Alignment & Push Punch USA & Canada
    Brownells Alignment & Push Punches .120" Brass Alignment & Push Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000025-080000029-11370.
    More....

    Lyman Deluxe Hammer & Punch Set Hammer Punch Set USA & Canada
    Lyman Deluxe Hammer & Punch Set Hammer Punch Set USA & Canada

    USD 53.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Compact set of popular sized punches, with hammer, stores in its own bench block for quick access. Combination brass/nylon hammer has machine knurled handle for positive grip. 4130 steel punches. Manufacturer: lyman specs: set includes 1/16" (1.5mm), 3/32" (2.3mm), 1/8" (3.1mm), 5/32" (3.9mm), 3/16" (4.7mm) diameter pin punches, 1/8" center punch, 3/16" diameter brass drift. Brass/nylon face hammer, 8" (20cm) overall length, hardwood storage block. High specification gunsmith punches by Lyman, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 539703129-539703129-11370.
    More....

    Brownells Roll Pin Starter Punches #6 Punch USA & Canada
    Brownells Roll Pin Starter Punches #6 Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Manufacturer: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2mm). #3, 3/32" (2.4mm), #4, 1/8" (3.2mm). #5, 5/32" (4mm). #6, 3/16" (4.8mm). 7/32" (5.5mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000247-080000241-11370.
    More....

    Brownells Roll Pin Starter Punches #1 Punch USA & Canada
    Brownells Roll Pin Starter Punches #1 Punch USA & Canada

    USD 5.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Manufacturer: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2mm). #3, 3/32" (2.4mm), #4, 1/8" (3.2mm). #5, 5/32" (4mm). #6, 3/16" (4.8mm). 7/32" (5.5mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000242-080000241-11370.
    More....

    Grace Roll Pin Punches 5/64" Punch USA & Canada
    Grace Roll Pin Punches 5/64" Punch USA & Canada

    USD 9.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: grace USA specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000027-354000025-11370.
    More....

    Grace Starter Punches Set 4 Pc USA & Canada
    Grace Starter Punches Set 4 Pc USA & Canada

    USD 21.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Starter punch set includes 4 flathead, tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Manufacturer: grace USA specs: starter punch set - 4 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000006-354000007-11370.
    More....

    Brownells Hole Center Punches #6 Hole Center Punch USA & Canada
    Brownells Hole Center Punches #6 Hole Center Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base. Drill and tap first hole. Re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Manufacturer: brownells specs: 2- " (7.0cm) long. " (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080732006-080732006-11370.
    More....

    Brownells Nylon/Brass Drift Punch Basic Nylon/Brass Punch Set USA & Canada
    Brownells Nylon/Brass Drift Punch Basic Nylon/Brass Punch Set USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080475000-080475001-11370.
    More....

    Brownells Roll Pin Punches #5 Roll Pin Punch USA & Canada
    Brownells Roll Pin Punches #5 Roll Pin Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100005-230100000-11370.
    More....

    Brownells Premium Roll Pin Starter Punches 3/16" Roll Pin Starter Punch USA & Canada
    Brownells Premium Roll Pin Starter Punches 3/16" Roll Pin Starter Punch USA & Canada

    USD 5.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001080-080001075-11370.
    More....

    Brownells Alignment & Push Punches Alignment/Push Punch Set USA & Canada
    Brownells Alignment & Push Punches Alignment/Push Punch Set USA & Canada

    USD 60.95 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000647-080000029-11370.
    More....

    Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2 1/2" Long .091 Dia. USA & Canada
    Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2 1/2" Long .091 Dia. USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Finally! what we think is the answer to the pin punch headache that has plagued us - and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now - just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel - tensile strength of over 140,000 psi (min.). Replaceable punch - the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2 " (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 " lengths. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080507591-080507239-11370.
    More....





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Grace Brass Punch Set Brass Pin Punch Set 8 Pc USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT