Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada







HOME PAGE PRODUCTS





Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada

Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada




Punches are machined from solid brass hex stock with a flat head and extra-long shaft to drive pins completely out. Brass is softer than steel, so it won't gouge the gun if you slip. Available as roll pin punches that have a dimple on the working end to keep the punch centered on the pin during use. Contains the following 8 sizes: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. All punches are 3 " long. Manufacturer: grace USA. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 749012802-749012802-11370.

Indicative Price: USD 33.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Gauge Rite Products Top Dead Center Punch USA & Canada
    Gauge Rite Products Top Dead Center Punch USA & Canada

    USD 37.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    The tdc is a rugged, foolproof tool to end the problems of off-center-work, broken taps and drills that come about from trying to "eyeball" top dead center on gun barrels or other round stock. Simple to use - just level and plumb the rifle on the drill press, place tdc on barrel or receiver, level the bubble and tap the punch. The punch mark is top dead center. Precision made. Shockproof level. Manufacturer: gauge-rite products specs: body - 1-15/16" (23.8mm) x 1- " (3.8mm) x 1" (2.5cm), aluminum. Punch - " (6.3mm) diameter tool steel. Locating rod - 5- " (14cm) long. High specification gunsmith punches by Gauge-Rite, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 871100000-871100000-11370.
    More....

    Mayhew Steel Single Pin Punches 5/32" (4.0mm) 4" (10.2cm) Long USA & Canada
    Mayhew Steel Single Pin Punches 5/32" (4.0mm) 4" (10.2cm) Long USA & Canada

    USD 9.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    No pin punch can be guaranteed against breakage, all the gunsmith can do is buy the very best available. When used with starting punches (see elsewhere), these will give you excellent service. Points will not bind in even deepest holes. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587475156-587475062-11370.
    More....

    Starrett #565 Pin Punch Set Starrett Pin Punch 7/32" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 7/32" USA & Canada

    USD 11.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525830-827525780-11370.
    More....

    Brownells Roll Pin Punches #6 Roll Pin Punch USA & Canada
    Brownells Roll Pin Punches #6 Roll Pin Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100006-230100000-11370.
    More....

    Brownells Hole Center Punches #8 Hole Center Punch USA & Canada
    Brownells Hole Center Punches #8 Hole Center Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base. Drill and tap first hole. Re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Manufacturer: brownells specs: 2- " (7.0cm) long. " (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080732008-080732006-11370.
    More....

    Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4 1/2" (11.4cm) Long USA & Canada
    Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4 1/2" (11.4cm) Long USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    No pin punch can be guaranteed against breakage, all the gunsmith can do is buy the very best available. When used with starting punches (see elsewhere), these will give you excellent service. Points will not bind in even deepest holes. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587493093-587475062-11370.
    More....

    Grace Brass Punch Set 1/16" (1.6mm) Brass Pin Punch USA & Canada
    Grace Brass Punch Set 1/16" (1.6mm) Brass Pin Punch USA & Canada

    USD 12.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Manufacturer: grace USA specs: brass, 5⁄16" (7.9mm) hex stock. Punch set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354100062-354100062-11370.
    More....

    Brownells Ar 15 Lower Punch Set USA & Canada
    Brownells Ar 15 Lower Punch Set USA & Canada

    USD 65.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Safely remove pins without risk of damaging gun's finish handy 7-piece kit contains all the pin punches and roll pin holders necessary to assemble and disassemble an ar-15 lower receiver without damaging the gun's finish or the pins themselves. Our nylon punch won't leave a mark, while our special bolt catch pin punch is uniquely shaped to clear the side of the receiver while you drive the pin. Other punches for hammer/trigger pins, pivot/takedown pins, and triggerguard, plus additional punches for the forward assist pawl pin and gas tube roll pin on the upper receiver. Manufacturer: brownells specs: contains: bolt catch pin punch, 1/4" pin punch, 1/16" and 5/64"roll pin punches, 1/8" and 3/32" roll pin holders, and non-marring nylon punch. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001305-080001305-11370.
    More....

    Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525840-827525780-11370.
    More....

    Mayhew Steel Single Center Punches 222 USA & Canada
    Mayhew Steel Single Center Punches 222 USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Made of properly hardened, tempered and ground tool steel to fill the gunsmith's shop requirements. Manufacturer: mayhew steel specs: punch 222 is " (6.3mm) o.D. X 3 " (9.0cm) long. Punch 455 is 5⁄16" (7.9mm) o.D. X 4" (10.2cm) long. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587111222-587111222-11370.
    More....

    Mayhew Steel Mini Punches 3/32" Mini Punch USA & Canada
    Mayhew Steel Mini Punches 3/32" Mini Punch USA & Canada

    USD 5.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    These three small diameter punches give excellent control because of their short length. Ideal when doing small, precision work or in tight spots where a full length punch just won't fit. Forged, one-piece construction with knurled handle. Manufacturer: mayhew steel specs: 2 " (7cm) overall. " (19mm) punch section. Steel. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587474093-587474062-11370.
    More....

    Mayhew Steel Single Starting Punches 5/32" Starting Punch USA & Canada
    Mayhew Steel Single Starting Punches 5/32" Starting Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Always use starting punches to break loose stuck or tight pins to protect both the pin punch and the gun. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587465156-587465062-11370.
    More....

    Brownells Alignment & Push Punches .151" Diameter Steel USA & Canada
    Brownells Alignment & Push Punches .151" Diameter Steel USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000031-080000029-11370.
    More....

    Brownells Roll Pin Starter Punches #3 Punch USA & Canada
    Brownells Roll Pin Starter Punches #3 Punch USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Manufacturer: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2mm). #3, 3/32" (2.4mm), #4, 1/8" (3.2mm). #5, 5/32" (4mm). #6, 3/16" (4.8mm). 7/32" (5.5mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000244-080000241-11370.
    More....

    Brownells Premium Roll Pin Starter Punches 3/16" Roll Pin Starter Punch USA & Canada
    Brownells Premium Roll Pin Starter Punches 3/16" Roll Pin Starter Punch USA & Canada

    USD 5.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001080-080001075-11370.
    More....





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT