Grace Roll Pin Punches 1/8" Punch USA & Canada







HOME PAGE PRODUCTS





Grace Roll Pin Punches 1/8

Grace Roll Pin Punches 1/8" Punch USA & Canada




Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: grace USA specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000029-354000025-11370.

Indicative Price: USD 8.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Brownells Hole Center Punches #10 Hole Center Punch USA & Canada
    Brownells Hole Center Punches #10 Hole Center Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base. Drill and tap first hole. Re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Manufacturer: brownells specs: 2- " (7.0cm) long. " (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080732010-080732006-11370.
    More....

    Mayhew Steel Mini Punches 5/64" Mini Punch USA & Canada
    Mayhew Steel Mini Punches 5/64" Mini Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    These three small diameter punches give excellent control because of their short length. Ideal when doing small, precision work or in tight spots where a full length punch just won't fit. Forged, one-piece construction with knurled handle. Manufacturer: mayhew steel specs: 2 " (7cm) overall. " (19mm) punch section. Steel. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587474078-587474062-11370.
    More....

    Brownells Dovetail Sight Punch Dovetail Punch Kit USA & Canada
    Brownells Dovetail Sight Punch Dovetail Punch Kit USA & Canada

    USD 21.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    These punches are specifically designed for the installation, removal, and adjustment of front and rear handgun sights. Made of brass so they will not mar the sight or the gun if you slip. Unique triangular punch faces and heavy-duty bodies make them indispensable working tools for the gunsmith. Can be re-ground to square up the flat after multiple uses. Front sight punch has a base width of approximately .280". Rear sight punch has a base width of approximately 0.480". They are sold separately or can be purchased together in a handy kit. The small dovetail sight punch (sold separately) has a .230" base width, making it ideal for front and rear sights on compact handguns. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001164-080001138-11370.
    More....

    Brownells Nylon/Brass Drift Punch 3/16" Brass Punch Tip USA & Canada
    Brownells Nylon/Brass Drift Punch 3/16" Brass Punch Tip USA & Canada

    USD 3.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080475004-080475001-11370.
    More....

    Starrett #565 Pin Punch Set Starrett Pin Punch 1/16" USA & Canada
    Starrett #565 Pin Punch Set Starrett Pin Punch 1/16" USA & Canada

    USD 12.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525780-827525780-11370.
    More....

    Grace Short Pin Punch Set Grace Short Pin Punch Kit USA & Canada
    Grace Short Pin Punch Set Grace Short Pin Punch Kit USA & Canada

    USD 27.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    The grace USA 5 piece short pin punch set is made with the utmost precision. Designed for meticulous work on detailed projects where a short pin punch is needed for accuracy and strength. Sizes 1/16", 5/64", 3/32", 1/8", and 5/32". These punches are made in the USA from high carbon molybendenum tool steel and properly heat treated and hardened the entire length with tempered striking end. They are also centerless ground for complete accuracy. The punches are manufactured from hex stock vs. Round which helps stabilize the punch from rolling away from the user. Packed in a vinyl pouch and 100% made in the USA. Manufacturer: grace USA. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 100025421-100025421-11370.
    More....

    Mayhew Steel Single Center Punches 222 USA & Canada
    Mayhew Steel Single Center Punches 222 USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Made of properly hardened, tempered and ground tool steel to fill the gunsmith's shop requirements. Manufacturer: mayhew steel specs: punch 222 is " (6.3mm) o.D. X 3 " (9.0cm) long. Punch 455 is 5⁄16" (7.9mm) o.D. X 4" (10.2cm) long. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587111222-587111222-11370.
    More....

    Brownells Roll Pin Punches #5 Roll Pin Punch USA & Canada
    Brownells Roll Pin Punches #5 Roll Pin Punch USA & Canada

    USD 6.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100005-230100000-11370.
    More....

    Brownells Roll Pin Punches #1 Roll Pin Punch USA & Canada
    Brownells Roll Pin Punches #1 Roll Pin Punch USA & Canada

    USD 8.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100001-230100000-11370.
    More....

    Brownells Roll Pin Punches Kit Type 230-112-105 USA & Canada
    Brownells Roll Pin Punches Kit Type 230-112-105 USA & Canada

    USD 26.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    The only way to properly install or remove roll pins without damage to either the pin or the surrounding metal. A small raised projection in the face of the punch automatically centers the punch and prevents the roll pin from collapsing. Manufacturer: brownells specs: #1, 1⁄16" (1.6mm) x 23⁄4" (7cm) l. #2, 5⁄64" (2mm) x 3" (8.2cm) l. #3, 3⁄32" (2.4mm) x 3" (9cm) l. #4, 1⁄8" (3.2mm) x 4" (10.2cm) l. #6, 3⁄16" (4.8mm) x 4" (11.4cm) l. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230112105-230112105-11370.
    More....

    Starrett 5/32" Center Punch Starrett 5/32" C Punch USA & Canada
    Starrett 5/32" Center Punch Starrett 5/32" C Punch USA & Canada

    USD 17.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Stakes socket-head cap screws securing the bolt carrier key to the bolt carrier. Manufacturer: starrett specs: 4" (10.2cm) long. 5/32" (4mm) punch, 3⁄8" diameter body. High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827512820-827512820-11370.
    More....

    Brownells Cup Tip Punches Model 1 .057" (1.44mm) Diameter/Long Length USA & Canada
    Brownells Cup Tip Punches Model 1 .057" (1.44mm) Diameter/Long Length USA & Canada

    USD 17.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Manufacturer: brownells specs: punches - steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long. .066" (1.7mm)/long. .072" (1.8mm/long. .040" (1mm)/short. .050" (1.3mm)/short. .050" (1.3mm)/long. 3mm (.118")/long. 3mm (.118")/short. Bench bl. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080620001-080620001-11370.
    More....

    Brownells Roll Pin Punches #3 Roll Pin Punch USA & Canada
    Brownells Roll Pin Punches #3 Roll Pin Punch USA & Canada

    USD 9.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100003-230100000-11370.
    More....

    Brownells Premium Roll Pin Holders 1/16" Diameter Roll Pin Holder USA & Canada
    Brownells Premium Roll Pin Holders 1/16" Diameter Roll Pin Holder USA & Canada

    USD 7.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001133-080001132-11370.
    More....

    Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2" Long .060 Dia. USA & Canada
    Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2" Long .060 Dia. USA & Canada

    USD 10.99 (Indicative price - actual current price possibly lower)

    Gunsmith Punches USA & Canada
    Finally! what we think is the answer to the pin punch headache that has plagued us - and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now - just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel - tensile strength of over 140,000 psi (min.). Replaceable punch - the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2 " (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 " lengths. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080507260-080507239-11370.
    More....





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Grace Roll Pin Punches 1/8" Punch USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT