Gunsmith Punches USA & Canada







HOME PAGE PRODUCTS



Gunsmith Punches USA & Canada


Gunsmith Punches USA & Canada




| Page 2
Grace Roll Pin Punches 1/8" Punch USA & Canada
Grace Roll Pin Punches 1/8" Punch USA & Canada



Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: grace USA specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000029-354000025-11370.

More Info & Supplier : click here

Brownells Premium Roll Pin Punches 5/32" Roll Pin Punch USA & Canada
Brownells Premium Roll Pin Punches 5/32" Roll Pin Punch USA & Canada



Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001072-080001083-11370.

More Info & Supplier : click here

Brownells Premium Roll Pin Holders 3.5mm Diameter Roll Pin Holder USA & Canada
Brownells Premium Roll Pin Holders 3.5mm Diameter Roll Pin Holder USA & Canada



Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001137-080001132-11370.

More Info & Supplier : click here

Brownells Premium Roll Pin Holders 5/64" Diameter Roll Pin Holder USA & Canada
Brownells Premium Roll Pin Holders 5/64" Diameter Roll Pin Holder USA & Canada



Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001134-080001132-11370.

More Info & Supplier : click here

Brownells Gunsmith's Alignment Pins Set USA & Canada
Brownells Gunsmith's Alignment Pins Set USA & Canada



Made for us exclusively, to our professional specifications, and are forged, taper-ground and polished. Dimensions set to give you size overlap from pin to pin to cover every conceivable situation. Tapers are 2" long on the 4" long pins. Manufacturer: brownells specs: taper as follows: small, from .070" (1.8mm) to .156" (4.0mm). Medium, from .110" (2.8mm) to .187" (4.7mm). Large, from .150" (3.8mm) to .219" (5.6mm). Knurled handle. Steel. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080645000-080645007-11370.

More Info & Supplier : click here

Brownells Premium Roll Pin Punches 1/8" Roll Pin Punch USA & Canada
Brownells Premium Roll Pin Punches 1/8" Roll Pin Punch USA & Canada



Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001071-080001083-11370.

More Info & Supplier : click here

Grace Roll Pin Punches 3/32" Punch USA & Canada
Grace Roll Pin Punches 3/32" Punch USA & Canada



Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: grace USA specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000028-354000025-11370.

More Info & Supplier : click here

Brownells Nylon/Brass Drift Punch 4 Way Nylon/Brass Punch Set USA & Canada
Brownells Nylon/Brass Drift Punch 4 Way Nylon/Brass Punch Set USA & Canada



Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080475100-080475001-11370.

More Info & Supplier : click here

Brownells Alignment & Push Punches .151" Diameter Brass USA & Canada
Brownells Alignment & Push Punches .151" Diameter Brass USA & Canada



For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000026-080000029-11370.

More Info & Supplier : click here

Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" USA & Canada
Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" USA & Canada



Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High specification gunsmith punches by Starrett, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 827525840-827525780-11370.

More Info & Supplier : click here

Little Crow Gunworks Ar 15 Trigger Guard Roll Pin Pusher For Ar 15 Style Rifles USA & Canada
Little Crow Gunworks Ar 15 Trigger Guard Roll Pin Pusher For Ar 15 Style Rifles USA & Canada



Pocket-sized tool helps prevent breaking the triggerguard tab or marring lower receiver finish when installing or removing the roll pin. Tool fully supports triggerguard tab while slowly pushing the roll pin in or out of its channel. Includes steel alignment pin and push pin to aid in roll pin removal and installation. Manufacturer: little crow gunworks, llc. Specs: aluminum body, anodized. Molded thermoplastic handle, 1-7/16" (3.6cm) diameter. Steel screw, push pin and alignment pin. High specification gunsmith punches by Little Crow, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 100011602-100011602-11370.

More Info & Supplier : click here

Brownells Roll Pin Punches #3 Roll Pin Punch USA & Canada
Brownells Roll Pin Punches #3 Roll Pin Punch USA & Canada



With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100003-230100000-11370.

More Info & Supplier : click here

Brownells Roll Pin Holders #4 1/8"(3.2mm) Dia 5"(12.7cm) O/A Length USA & Canada
Brownells Roll Pin Holders #4 1/8"(3.2mm) Dia 5"(12.7cm) O/A Length USA & Canada



Holds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear m16/ar-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on sig handguns. Finish driving with roll pin punch. O/a in chart means "overall". Available individually or as a set of 5. Manufacturer: brownells specs: steel, knurled handle. Set of 5. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080685125-080685125-11370.

More Info & Supplier : click here

Brownells Alignment & Push Punches .246" Diameter Steel USA & Canada
Brownells Alignment & Push Punches .246" Diameter Steel USA & Canada



For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000032-080000029-11370.

More Info & Supplier : click here

Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2 1/2" Long .039 Dia. USA & Canada
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2 1/2" Long .039 Dia. USA & Canada



Finally! what we think is the answer to the pin punch headache that has plagued us - and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now - just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel - tensile strength of over 140,000 psi (min.). Replaceable punch - the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2 " (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 " lengths. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080507539-080507239-11370.

More Info & Supplier : click here

Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4" (10.2cm) Long USA & Canada
Mayhew Steel Single Pin Punches 3/32" (2.4mm) 4" (10.2cm) Long USA & Canada



No pin punch can be guaranteed against breakage, all the gunsmith can do is buy the very best available. When used with starting punches (see elsewhere), these will give you excellent service. Points will not bind in even deepest holes. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587475093-587475062-11370.

More Info & Supplier : click here

Geissele Automatics Gas Block Punch Kit USA & Canada
Geissele Automatics Gas Block Punch Kit USA & Canada



The geissele gas block pin punch set are made speccifically for the removal and installation of the 0.078" roll pin that secures the gas tube to the gas block on an ar-15/ar-308. Removal of a rusted in gas block roll pin has always been a challenge. The geissele punch set make gas block work a whole lot easier. Manufacturer: geissele automatics llc. High specification gunsmith punches by Geissele, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 100015137-100015137-11370.

More Info & Supplier : click here

Grace Starter Punches Set 4 Pc USA & Canada
Grace Starter Punches Set 4 Pc USA & Canada



For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Starter punch set includes 4 flathead, tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Manufacturer: grace USA specs: starter punch set - 4 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000006-354000007-11370.

More Info & Supplier : click here

Brownells Roll Pin Punch Set USA & Canada
Brownells Roll Pin Punch Set USA & Canada



We combined 19 of our most popular roll pin punches and added a handy bench block to come up with the perfect punch set for the busy shop or department armor. Easily start, remove, and install spring pins and roll pins in firearms without damage to the pin or firearm. Features (5) holder punches, (7) starter punches, and (7) standard punches that can easily handle any job out there. Made from solid steel, with parallel-ground shanks and knurled handles. Also includes a non-marring, nylon drift punch that won't damage or scrape delicate surface finishes. Machined, delrin bench block holds and organizes all the punches for easy access. Holder punches cup and hold roll pins, keeping Manufacturer: brownells specs: punches - steel, knurled handle, matte black. Nylon punch - 4" (10cm) long x 5⁄16" (7.9mm) diameter. Holder punches - contains (1) of each diameter: 1⁄16" (1.6mm), 5⁄64" (2mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), 9⁄64" (3.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000651-080000651-11370.

More Info & Supplier : click here

Brownells Alignment & Push Punches .092" Diameter Steel USA & Canada
Brownells Alignment & Push Punches .092" Diameter Steel USA & Canada



For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass . 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000029-080000029-11370.

More Info & Supplier : click here

Mayhew Steel Single Starting Punches 1/16" Starting Punch USA & Canada
Mayhew Steel Single Starting Punches 1/16" Starting Punch USA & Canada



Always use starting punches to break loose stuck or tight pins to protect both the pin punch and the gun. Manufacturer: mayhew steel specs: tool steel. Knurled body. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587465062-587465062-11370.

More Info & Supplier : click here

Brownells Gunsmith Replaceable Pin Punch Set Replacement Pins 2"x.060" USA & Canada
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pins 2"x.060" USA & Canada



Finally! what we think is the answer to the pin punch headache that has plagued us - and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now - just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel - tensile strength of over 140,000 psi (min.). Replaceable punch - the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2 " (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 " lengths. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080509660-080507239-11370.

More Info & Supplier : click here

Brownells Premium Roll Pin Punches 1/16" Roll Pin Punch USA & Canada
Brownells Premium Roll Pin Punches 1/16" Roll Pin Punch USA & Canada



Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001068-080001083-11370.

More Info & Supplier : click here

Grace Brass Punch Set 5/32" (4mm) Brass Pin Punch USA & Canada
Grace Brass Punch Set 5/32" (4mm) Brass Pin Punch USA & Canada



For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Manufacturer: grace USA specs: brass, 5⁄16" (7.9mm) hex stock. Punch set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354100156-354100062-11370.

More Info & Supplier : click here

Brownells Gunsmith's Alignment Pins Large Alignment Pin USA & Canada
Brownells Gunsmith's Alignment Pins Large Alignment Pin USA & Canada



Made for us exclusively, to our professional specifications, and are forged, taper-ground and polished. Dimensions set to give you size overlap from pin to pin to cover every conceivable situation. Tapers are 2" long on the 4" long pins. Manufacturer: brownells specs: taper as follows: small, from .070" (1.8mm) to .156" (4.0mm). Medium, from .110" (2.8mm) to .187" (4.7mm). Large, from .150" (3.8mm) to .219" (5.6mm). Knurled handle. Steel. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080645015-080645007-11370.

More Info & Supplier : click here











Try Search on this site - find exactly what you need!




Item on this page: Gunsmith Punches USA & Canada



Home Page Search Products Contact Us Privacy Policy



Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT