Mayhew Steel Single Center Punches 455 USA & Canada







HOME PAGE PRODUCTS





Mayhew Steel Single Center Punches 455 USA & Canada

Mayhew Steel Single Center Punches 455 USA & Canada




Made of properly hardened, tempered and ground tool steel to fill the gunsmith's shop requirements. Manufacturer: mayhew steel specs: punch 222 is " (6.3mm) o.D. X 3 " (9.0cm) long. Punch 455 is 5⁄16" (7.9mm) o.D. X 4" (10.2cm) long. High specification gunsmith punches by Mayhew, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 587113455-587111222-11370.

Indicative Price: USD 3.99
(for Actual Current Price, possibly lower,
please click below)

Availability: In stock while stock lasts.
Condition: BRAND NEW


More Info & Buy : click here
  • to view current price, Special Offers, more details & similar items
  • to BUY THIS ITEM










  • Try Search on this site - find exactly what you need!





    Visitors interested in this item
    were also interested in the following:





    Visitors interested in this item were also interested in the following:

    Brownells Premium Roll Pin Holders 1/8" Diameter Roll Pin Holder USA & Canada
    Brownells Premium Roll Pin Holders 1/8" Diameter Roll Pin Holder USA & Canada




    Gunsmith Punches USA & Canada
    Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the USA. Manufacturer: brownells. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001136-080001132-11370.

    More Info & Supplier : click here

    Grace Brass Punch Set 7/32" (5.3mm) Brass Pin Punch USA & Canada
    Grace Brass Punch Set 7/32" (5.3mm) Brass Pin Punch USA & Canada




    Gunsmith Punches USA & Canada
    For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Manufacturer: grace USA specs: brass, 5⁄16" (7.9mm) hex stock. Punch set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354100218-354100062-11370.

    More Info & Supplier : click here

    Brownells Premium Roll Pin Starter Punches 5/64" Roll Pin Starter Punch USA & Canada
    Brownells Premium Roll Pin Starter Punches 5/64" Roll Pin Starter Punch USA & Canada




    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001076-080001075-11370.

    More Info & Supplier : click here

    Brownells Gunsmith's Alignment Pins Large Alignment Pin USA & Canada
    Brownells Gunsmith's Alignment Pins Large Alignment Pin USA & Canada




    Gunsmith Punches USA & Canada
    Made for us exclusively, to our professional specifications, and are forged, taper-ground and polished. Dimensions set to give you size overlap from pin to pin to cover every conceivable situation. Tapers are 2" long on the 4" long pins. Manufacturer: brownells specs: taper as follows: small, from .070" (1.8mm) to .156" (4.0mm). Medium, from .110" (2.8mm) to .187" (4.7mm). Large, from .150" (3.8mm) to .219" (5.6mm). Knurled handle. Steel. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080645015-080645007-11370.

    More Info & Supplier : click here

    Little Crow Gunworks Ar 15 Trigger Guard Roll Pin Pusher For Ar 15 Style Rifles USA & Canada
    Little Crow Gunworks Ar 15 Trigger Guard Roll Pin Pusher For Ar 15 Style Rifles USA & Canada




    Gunsmith Punches USA & Canada
    Pocket-sized tool helps prevent breaking the triggerguard tab or marring lower receiver finish when installing or removing the roll pin. Tool fully supports triggerguard tab while slowly pushing the roll pin in or out of its channel. Includes steel alignment pin and push pin to aid in roll pin removal and installation. Manufacturer: little crow gunworks, llc. Specs: aluminum body, anodized. Molded thermoplastic handle, 1-7/16" (3.6cm) diameter. Steel screw, push pin and alignment pin. High specification gunsmith punches by Little Crow, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 100011602-100011602-11370.

    More Info & Supplier : click here

    Brownells Cup Tip Punches Set B USA & Canada
    Brownells Cup Tip Punches Set B USA & Canada




    Gunsmith Punches USA & Canada
    Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Manufacturer: brownells specs: punches - steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long. .066" (1.7mm)/long. .072" (1.8mm/long. .040" (1mm)/short. .050" (1.3mm)/short. .050" (1.3mm)/long. 3mm (.118")/long. 3mm (.118")/short. Bench bl. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080620203-080620001-11370.

    More Info & Supplier : click here

    Lyman Pistol Punch Set USA & Canada
    Lyman Pistol Punch Set USA & Canada




    Gunsmith Punches USA & Canada
    Five steel and brass gunsmith punches handle a variety of any pistol disassembly and reassembly jobs. Each precision-machined punch is through-hardened for maximum strength. Knurled handles ensure a firm grip to prevent slippage and protect your gun's finish from scratches and scuffs. Manufacturer: lyman specs: pin punches - 4140 chrome-moly steel. A - 3-3/8" (9.2cm) x 5/32" (4mm) diameter. B - 3-5/8" (9.2cm) long x 3/32" (2.4cm) dia. D - 4 " (11.4cm) long x 5/32" (4mm) dia. F - 4 " (10.8cm) long x 1/8" (3.2mm) dia. Drift punch brass. 3&f. High specification gunsmith punches by Lyman, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 539000019-539000019-11370.

    More Info & Supplier : click here

    Grace Starter Punches 5/32" (4mm) Starter Brass Punch USA & Canada
    Grace Starter Punches 5/32" (4mm) Starter Brass Punch USA & Canada




    Gunsmith Punches USA & Canada
    For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Starter punch set includes 4 flathead, tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Manufacturer: grace USA specs: starter punch set - 4 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000010-354000007-11370.

    More Info & Supplier : click here

    Brownells Roll Pin Punches #7 Roll Pin Punch USA & Canada
    Brownells Roll Pin Punches #7 Roll Pin Punch USA & Canada




    Gunsmith Punches USA & Canada
    With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230100007-230100000-11370.

    More Info & Supplier : click here

    Grace Starter Punches 1/8" (3.2mm) Starter Brass Punch USA & Canada
    Grace Starter Punches 1/8" (3.2mm) Starter Brass Punch USA & Canada




    Gunsmith Punches USA & Canada
    For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Starter punch set includes 4 flathead, tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Manufacturer: grace USA specs: starter punch set - 4 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32" dia. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 354000009-354000007-11370.

    More Info & Supplier : click here

    Brownells Roll Pin Punches Kit Type 230-112-105 USA & Canada
    Brownells Roll Pin Punches Kit Type 230-112-105 USA & Canada




    Gunsmith Punches USA & Canada
    The only way to properly install or remove roll pins without damage to either the pin or the surrounding metal. A small raised projection in the face of the punch automatically centers the punch and prevents the roll pin from collapsing. Manufacturer: brownells specs: #1, 1⁄16" (1.6mm) x 23⁄4" (7cm) l. #2, 5⁄64" (2mm) x 3" (8.2cm) l. #3, 3⁄32" (2.4mm) x 3" (9cm) l. #4, 1⁄8" (3.2mm) x 4" (10.2cm) l. #6, 3⁄16" (4.8mm) x 4" (11.4cm) l. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 230112105-230112105-11370.

    More Info & Supplier : click here

    Brownells Roll Pin Starter Punches Kit USA & Canada
    Brownells Roll Pin Starter Punches Kit USA & Canada




    Gunsmith Punches USA & Canada
    Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Manufacturer: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2mm). #3, 3/32" (2.4mm), #4, 1/8" (3.2mm). #5, 5/32" (4mm). #6, 3/16" (4.8mm). 7/32" (5.5mm). #7, 7/32" (5.5mm). High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080000241-080000241-11370.

    More Info & Supplier : click here

    Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch Set Of 3 W/2" Pins USA & Canada
    Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch Set Of 3 W/2" Pins USA & Canada




    Gunsmith Punches USA & Canada
    Finally! what we think is the answer to the pin punch headache that has plagued us - and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now - just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel - tensile strength of over 140,000 psi (min.). Replaceable punch - the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2 " (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 " lengths. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080507000-080507239-11370.

    More Info & Supplier : click here

    Brownells Premium Roll Pin Punches Kit USA & Canada
    Brownells Premium Roll Pin Punches Kit USA & Canada




    Gunsmith Punches USA & Canada
    Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High specification gunsmith punches by Brownells, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 080001083-080001083-11370.

    More Info & Supplier : click here

    Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada
    Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch USA & Canada




    Gunsmith Punches USA & Canada
    Punches are machined from solid brass hex stock with a flat head and extra-long shaft to drive pins completely out. Brass is softer than steel, so it won't gouge the gun if you slip. Available as roll pin punches that have a dimple on the working end to keep the punch centered on the pin during use. Contains the following 8 sizes: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. All punches are 3 " long. Manufacturer: grace USA. High specification gunsmith punches by Grace, buy online with confidence at best discount price and fast shipping to U.S. and Canada. Manufacturer produt ID 749012802-749012802-11370.

    More Info & Supplier : click here





  • FROM SAME CATEGORY : Gunsmith Punches USA & Canada : click here!

  • PRODUCT LIST : by product category : click here!
  • 307-2-RGB











    Try Search on this site - find exactly what you need!




    Item on this page: Mayhew Steel Single Center Punches 455 USA & Canada



    Home Page Search Products Contact Us Privacy Policy



    Copyright © StarGunSupply.com : 1997 - 2021 : All rights reserved. 140-FT